NOTE: If you have previously purchased and installed a copy of the Logos
Bible Software v1.6, please disregard these instructions and install your
new version of the Logos Library System according to the instructions in
the previous section.
If you have previously purchased and installed a copy of the Logos Library
System v2.0, or v2.0a-v2.0e, please follow the instructions below to install
the Logos Library System v2.1f.
CAUTION: Installation creates default settings for specific named workspaces, KeyLinks and Associated Titles that may reset certain previously-defined settings.
1. Open your existing version of Logos and select Tools...Backup System
Files.
2. In the Backup System Files dialog, navigate to a directory other
than your \LOGOS20 or \LRSYSTEM directory and click OK. This is a backup
of your unlocking to be used if the installation process fails. Please
place the backup file in a temporary file on your hard drive or put it
on a floppy disk.
3. Exit Logos.
4. Insert your Logos Library System CD in your CD-ROM drive and the first
of the installation diskettes (if any), in your diskette drive.
5. If you are running Windows 3.1, select File...Run from the Program
Manager.
If you are running Windows 95, select Start...Run from the Taskbar.
6. In the Run dialog's edit control, type A:\SETUP (where A:\ is your
diskette drive) then press ENTER.
If you only have a CD, type E:\SETUP (where E:\is your CD-ROM drive)
then press ENTER.
If you are UPDATING your version of the Logos Library System only, type
D:\UPDATE (where D:\is your CD-ROM drive) then press ENTER.
7. When prompted, click OK to select the default directory C:\LOGOS20.
If you have previously installed the Logos Library System v2.0, or
v2.0a-v2.0e the text C:\LRSYSTEM will be grayed out and not editable.
If you have previously installed the Logos Library System v2.1 or later,
the path for the program files will also be grayed out.
(These settings are maintained in the [LRSystems] section of the WIN.INI
file.) We strongly recommend using the defaults.
8. You may then be prompted to enter a Product Code (if any).
If so, enter the Product Code found on the label of first installation
diskette and click OK.
If you only have a CD, enter the Product Code found on the back of the
jewel case.
9. You will then be prompted to specify the Program Group name where you
want the application icons to be installed. If you wish to keep the
icons in the same group as the previous installation, click the down
arrow button and select the group name from the list, or you can type
in a new name for your own custom group. Click OK.
10. You may be prompted to accept the location of your CD-ROM drive or
change the drive letter to the actual location of your CD-ROM drive.
If the drive letter displayed is correct, click OK. If the drive letter
displayed is NOT correct, type in the correct drive letter, then
click OK.
11. You may be prompted to register electronically. If you wish to do so at
that time, click the Internet Registration button (if you are running
Windows 3.11 or earlier you will have to connect to the internet and
start your browser before you do this). If you wish to register later,
click the Register Later button. To register at a later time you can
either fill out the registration card (if any) sent with your product,
or you can point your internet browser to:
http://www.logos.com/register
To do this you MUST have your Product Code ready because the
registration page will ask you for it.
You may also go to the Logos web site (http://www.logos.com), navigate
to the Technical Support area and click on the Register Your Software Now
prompt in the left margin of the screen.
When you see the "Installation Complete!" dialog, you will then be ready
to run your Logos Library System product.
IIIa. Downloading and installing from the web for users who have
previous installations of Logos Library System v2.0 or later
NOTE: If you have previously purchased and installed a copy of the Logos
Bible Software v1.6, please disregard these instructions and download and
install the New User version of Logos Library System, as described in
section IIa.
If you have previously purchased and installed a copy of the Logos Library
System v2.0, v2.0a-v2.0e, v2.1 or v2.1a, please follow the instructions
below to install the Logos Library System v2.1f.
CAUTION: Installation creates default settings for specific named workspaces, KeyLinks and Associated Titles that may reset certain previously-defined settings.
1. Open your existing version of Logos and select Tools...Backup System
Files.
2. In the Backup System Files dialog, navigate to a directory other than
your \LOGOS20 or \LRSYSTEM directory and click OK. This is a backup
of your unlocking to be used only if the installation process fails.
Please place the backup file in a temporary file on your hard drive or
put it on a floppy disk.
3. Exit Logos.
4. The latest version of Logos Library System can be downloaded from our
WWW site at http://www.logos.com/lls. Please notice and remember where
you store the downloaded files, as you'll need to know where they are
and how to get to them to complete the upgrade.
5. If you have downloaded the single file self-extracting version of the
installation, you will need to extract the setup files from the single
file downloaded from the web. To do this, navigate to the location on
your hard disk where you downloaded the files using Explorer or File
Manager. Double-click on the file you've downloaded from the web. It
will extract a SETUP.EXE, a SETUP.000, and a SHADOW.EXE. If you have
downloaded the multi-file version of the installation, make sure you
have all of the parts in the same directory and proceed to the next
step.
6. Double-click on the SETUP.EXE file, which was either downloaded from
the web in the case of the multi-file download, or extracted in step
#5 in the case of the single-file download.
7. The setup program will begin to run. If you have previously installed
the Logos Library System v2.0, v2.0a-v2.0e, v2.1 or v2.1a, the System
files location and possibly the Program files location will be grayed
out and not editable. (These settings are maintained in the [LRSystems]
section of the WIN.INI file.) We strongly recommend using the defaults.
8. You will then be prompted to enter a Product Code (which is found at
the same location where you found the download), then click OK.
9. You will then be prompted to specify the Program Group name where
you want the application icons to be installed. If you wish to keep
the icons in the same group as the previous installation, click the
down arrow button and select the group name from the list, or you can
type in a new name for your own custom group. Click OK.
10. You will be prompted to register electronically. If you wish to do so
at that time, click the Internet Registration button (if you are
running Windows 3.11 or earlier you will have to connect to the
internet and start your browser before you do this). If you wish
to register later, click the Register Later button. To register at
a later time you can either fill out the registration card (if any)
sent with your product, or you can point your internet browser to:
http://www.logos.com/register.
To do this you MUST have your Product Code ready because the
registration page will ask you for it. You may also go to the
Logos web site (http://www.logos.com), navigate to the Technical
Support area and click on the Register Your Software Now prompt
in the left margin of the screen.
When you see the "Installation Complete!" dialog, you will then be ready
to run your Logos Library System product.
IV. Features not mentioned in the printed User's Guide.
.iso/LOGOS20/pharosph.bmp){kind=link}